Ring 4 3/plus 2 Gen(2020) & Original Doorbell Mount Angle Board & Vinyl Siding

Description

This is the original mount started 2 years ago and as featured on Youtube and made and designed by Nearlynewmodels. All others are knockoffs.
Has mounting holes that fits:
New Ring 4
Ring Original video Doorbell
Ring 2 Video doorbell
New Ring 3 video Doorbell and Ring 3 Plus video Doorbell
New Ring 2nd Gen Doorbell aka Ring 2020 Model
Does NOT fit Ring PRO 1 or Ring PRO2 doorbell. Ring PRO mounts are available in another listing.
4" Vinyl siding version has a curve to fit the natural curve on standard vinyl siding so your wires and a gap are not exposed to the weather. Nearlynewmodels is the only one that has a mount that does this. all others available are flat leaving a gap between the mount and siding
Comes with longer screws and installation instruction sheet. No one else does this but the original nearlynewmodelsmount.
Made of high quality plastic that is made for heat and cold. Everyone else is using BIODEGRADABLE PLA which is absolutely what you DO NOT want for an item outside.
This item Does NOT need any Adapters to fit the newer doorbells. Holes are made intp the mount itself. Nearlynewmodels mount is the only one doing this.
Holes for mounting the angle shims are on the mount. Nearlynewmodels mount is the only one doing this.
*This item Does NOT fit on Dutchlap style siding (Dutchlap siding has a flat front that proceeds into an angled top that slants backwards towards the house. ) For Dutchlap vinyl siding please contact me for custom order as every Dutchlap siding panel is different and these have to be made to fit your siding dimensions. If you are not sure if you have Dutch Lap style siding. send me a picture of your siding. i can tell by looking at a picture.
Choose a color that’s close to your siding color or choose black to match the back of the Ring Doorbell.
Choose side to match the size of the siding you have. Measure top to bottom of a single panel.
Choose Board metal version if you have metal aluminum siding, Cedar siding, cement board siding
Choose Vinyl siding version if you have standard lap vinyl siding.
Does not fit vinyl Dutch lap siding panels. Dutchlap has a flat front with an angled back (when used is used on dutchlap siding there will be a gap at the top where siding angles backwards and the mount will face downwards. Contact me for a dutchlap solution.
FEATURES: why is this mount worth you money over other mounts sold on eBay?see below.
Has mounting holes included for ring 2 shims that come with the ring2 doorbell.
Has pre drilled recessed holes and comes with matching rust resistant screws to mount (other vendors online do not have right size holes or screws)
Printed on high quality settings on quality calibrated printer (other vendor online is selling miscalibrated ugly versions with inconsistent print quality. Even tells you in ad that his are “seconds” on quality. I have one of theirs and was shocked at the quality. If I wouldn’t install it on my own house I’m not going to sell it to you for yours!)
my mount is solid. (Competitor is printing his hollow!)
not one size fits all. My mounts fit a specific version of doorbell. Mine is designed to compliment the looks of your expensive video doorbell! (Competitors mounts are all the same for 3 different doorbells )
***NEW*** 5+" FLAT Wedge Siding Option ***NEW***
This is for Vinyl siding, Hardi board, Cement board, Cedar, Aluminum or any flat but slanted front siding.
Usually comes in single 1 slat per board. This is a wedge with no leg to hinder placement on the panel. it can be placed anywhere. This is the version you want if you want a 5-7% vertical shim or vertical wedge like what ring provides with the ring 2 and ring pro to angle your existing camera up or down.
This item is for Panels that measure 5inches or greater than 5". This has no standoff leg and is similar to the wedge that comes with the ring 2 but is angled 7degrees instead of 5degrees and is solid so no water or bugs can get behind it and gives you a much stronger mounting surface.
This is the version you want if you have a large siding panel this allows you to mount doorbell anywhere on the panel. Perfect for if you want you doorbell higher, lower or centered on the panel. It still has the Siding angle built in so doorbell faces straight ahead.
This is also the version you want if you have flat siding (brick, stucco, etc) and want to angle your doorbell up or down 7degrees
This is also the version you want if you have angled siding such as vinyl siding but your doorbell is too low and you want it angled up more. this will angle the doorbell up addition 7 degrees on angled siding.
(This item is pictured in last picture)
i offer installation technical support via a paper instructions document a YouTube install video and email support and returns and exchanges.
this is my design I drew it and own it and can make changes to make it better (competition is selling a design they downloaded for free off the internet)
Has a sleek minimalist design (other vendors online are selling bulkier models)
Is made from a more expensive weather resistant plastic up to 176 degrees F (other vendors online parts are made from cheap PLA plastic that can only withstand 110 degrees F) Also Fits:
Fits Zmodo Greet Doorbell
Fits EKEN, KOOCE, JGT, ItTiot
Fits any *Universal others(63mmx128mm).
Mount Comes with mounting screws and instruction sheet.
Please see pictures. 


Printed in a material called PETG. This material resists UV LIGHT and resists all sorts of chemicals. Recyclable. And most importantly resists cold temperatures as well as up to 200 degrees Fahrenheit. 

Now ships with printed installation instruction sheet.
Comes with two longer screws. All mounting hardware you need is included. Ring Doorbell not included.