Ring Pro Doorbell Mount for Angle Vinyl Hardiboard Metal Siding Version

Description

This is the original mount started 2 years ago and as featured on Youtube and made and designed by Nearlynewmodels. All others are knockoffs.
Fits Ring Doorbell Pro
original only.
Does not fit Ring P
RO 2 (ring pro2 is different size and has a curved back and different screw holes) or RING
2, Ring Gen2, Ring 3 or Ring Original. Those are in another listing.
Vinyl siding version has curve to fit against your siding snug so no gaps behind mount and wires are not exposed. Nobody else does this but nearlynewmodels 
mount. Everyone elses is same old clone with flat sides not matching up to siding contour and leaving wires exposed to elements.
Heatsink is recessed into the mount. No one else does this but nearlynewmodels mount. Everyone else is the same with a flat from leaving heatsinks and wires exposed to elements.
Comes with longer screws and installation instruction sheet.  No one else does this but the original nearlynewmodelsmount.
Comes with mounting slots built into the mount to accomodate the angle shims right provides. The shims sit recessed into the mount. No one Else does this but nearlynewmodels
Made of high quality plastic that is made for heat and cold. Everyone else is using BIODEGRADABLE PLA which is absolutely what you DO NOT want for and item outside.
Reason you want this. Mount is a Colored shim to fix the angled doorbell problem where your doorbell when screwed to 4-5" wide vinyl siding this will make the doorbell face straight ahead instead of slanted upwards. Also helps to mount the doorbell on panels shorter than the doorbell is long.  Choose a color that’s close to your siding color or choose black to match the back of the Ring Doorbell.
Standard vinyl siding version only. Standard siding has an angled front but a slight curve where it dips in the middle. This mount also has a slight curve to fit standard lap vinyl siding snug with no gaps behind mount for water and bugs to nest. Plus just looks better installed.
(other vendors selling online do not have this)
.
If you have Dutchlap Siding (Dutchlap siding has a flat front with and angled top. This mount will not work with Dutchlap siding. Contact me to find out how i can make you a custom piece to fit your dutchlap siding)
Now with cutout/recess for heatsink (metal ridges on bottom) so the heatsink and wedges recess down into the mount so the heatsink is not visible. resulting in a much cleaner looking install. (With Competitors your ring sits on top of the mount where water and bugs can nest behind it)
Has pre drilled recessed holes and comes with matching rust resistant screws to mount (other vendors online do not have right size holes or screws)
Printed on high quality settings on quality printer (other vendor online is selling miscalibrated ugly versions with inconsistent print quality. Even tells you in ad that his are “seconds” on quality
This mount is not one size fits all. My mounts fit a specific version of doorbell and a specific siding size.(Competitors mounts are all the same for 3 different doorbells )
My mount is solid. (Competitor is printing his hollow)
i offer installation technical support via a paper instructions document and a YouTube install video and also email installation and post/pre purchase support.
This is my design.  I drew it and own it and can make changes to make it better (competitor is selling a design they downloaded for free off the internet)
Has a sleek minimalist design (other vendors online are selling bulkier models)
This mount Is made from a more expensive weather resistant plastic up to 176 degrees F (other vendors online parts are made from cheap PLA plastic that can only withstand 110 degrees F)
***NEW***  5+" Siding Option (common) ***NEW***
This is for Vinyl siding, Hardi board, Cement board, Cedar, Aluminum or any flat but slanted front siding.
Usually comes in single 1 slat per board. This is the version you want if you want a 5-7% vertical shim or vertical wedge like what ring provides with the ring 2 and ring pro to angle your existing camera up or down.
This item is for Panels that measure 5inches or greater than 5". This has no standoff leg and is similar to the wedge that comes with the ring 2 but is angled 7degrees instead of 5degrees and is solid so no water or bugs can get behind it and gives you a much stronger mounting surface.
This is the version you want if you have a large siding panel this allows you to mount doorbell anywhere on the panel. Perfect for if you want you doorbell higher, lower or centered on the panel. It still has the Siding angle built in so doorbell faces straight ahead. 
This is also the version you want if you have flat siding (brick, stucco, etc) and want to angle your doorbell up or down 7degrees
This is also the version you want if you have angled siding such as vinyl siding but your doorbell is too low and you want it angled up more. this will angle the doorbell up addition 7 degrees on angled siding.
(This item is not pictured)
To expedite your shipment: respond in your order with a note "I have read description". if you do not put "i have read description" in notes when ordering you will be asked to confirm your order 3x before it ships and once ships it will be subject to restocking above. This is to insure it fits the doorbell you have and to confirm that you realize it is a WEDGE and does not have a leg on it.
If unsure what siding you have or the size or doorbell you have please use messaging to send a picture before purchasing.
Please see pictures.
Now ships with printed installation instruction sheet.
Comes with two longer screws. All mounting hardware you need is included. Ring Doorbell Pro not included.
Printed in a material called PETG. This material resists UV LIGHT and resists all sorts of chemicals. Recyclable. And most importantly resists cold temperatures as well as up to 200 degrees Fahrenheit.